Презентация, доклад по английскому языку на тему Welding( IV курс)

of resistance welding:
-Spot Welding;
- Butt Welding;
-Flash Welding;
- Percussion Welding;
-Seam Welding;
-Projection Welding;
- Electric Arc Welding

6. Gas Welding

Contents:

of metal to form one homogeneous mass of metal.
Fusion of two masses of metal may be brought about four different processes, namely:
Forge or blacksmith welding;
Thermit welding;
3) Electric welding;
4) Gas welding.

two masses of metal to be welded are heated in a blacksmith’s forge or appropriate furnace until the metal reaches a plastic stage. At that time the two masses are quickly joined and fused together by force from a hand or power hammer. Such a process is limited to fairly low carbon steels of solid plain shape. It is obvious that such welding has a narrow range of application, although there is still a large quantity of forge welding done in railroad shops and country blacksmith shops.

a chemical reaction obtained by igniting finely divided aluminium and iron oxide. A mold is formed around the pieces to be welded, and the metal is then preheated to a dull red colour. The aluminium and iron oxide are retained in a funnel-shaped receptacle which can be tapped into the mold when the aluminium and iron oxide have been made molten by the chemical reaction which is started by a fuse.

Thermit Welding

high enough to fuse the broken sections, thus forming a homogeneous mass of metal. The equipment for thermit welding is simple and inexpensive but the quality of the weld is not such as to recommend it for extensive use. The process can be used only on low carbon steels and wrought iron.

forge welding. It consists of heating to their plastic temperature the surfaces of parts to be joined, then applying pressure mechanically to achieve complete union of the parts. The heating is accomplished by passage of a heavy, localized electric current. Alternating current of common commercial voltage is employed for this purpose. In all types of resistance welding, selection of proper electrodes is important to the success of the process. Electrodes must possess a high degree of thermal and electrical conductivity and they also must possess strength and hardness.

percussion welding; seam welding; projection welding.

between suitable electrodes which pass a heavy current through the materials to be welded.
The electrodes then are forced together by pressure of sufficient force to join the surfaces of the base metals in a spot. A spot-welding machine is the simplest form of resistance-welding device, therefore it is widely adapted throughout the metal-working industry.

mechanically and pressed together while heat is generated by passage of a heavy current through the area of the joint.
Butt welding is used extensively for resistance welding work. Pipes, tubing, bars, rods, light-and medium-weight structural shapes, etc, may be butt welded.

consisting in the method of heating the base metals. The electrodes are clamped to the parts to be joined, and a heavy current is passed through them. The movable electrode brings the surface of the metal it holds into contact with the surface of the metal held in the stationary electrode. Just before the two pieces meet, an arc developed in the short gap causes sufficient heat to make the surface to be joined plastic.

it relies upon a sudden discharge of electrical energy (produced by the arc) at the joint to generate sufficient heat to make the surfaces to be joined plastic. The pressure required to accomplish the weld at the proper moment is obtained by employing a heavy spring.

Percussion stud

or more base metals between electrodes which are in the form of rollers. The current is transmitted through the electrodes to the metals. The mechanical pressure required for forcing them together, as well as the current is transmitted by the roller-shaped electrodes. The welded joint thus produced is similar to a seam made in cloth.

, gasoline tanks, automobile mufflers, aircraft fabrications, pipes for furnaces and stoves, and other products requiring pressure-tight seams and rapidly produced by seam welding.

of joining two pieces of metal, one or both of which have mechanically formed projections. The purpose of the projection is to localize the current.
The current and pressures required for this type of welding are heavier than those applied in spot welding. Various sheet-metal parts used in automobile and aircraft production are welded by this process.

to be joined are fused by the heat of an electric arc. By bringing the work and the electrode together as conductors, an electric circuit is established; then, by separating the conductors, an electric arc is created in which the electrical energy is converted into heat.

high) is supplied by combining suitable gases. All gas welding process utilize oxygen combined with acetylene and other fuels. The welding torch or blowpipe consists essentially of a gas mixing chamber and usually is designed in two types: the low-pressure injection type and the equal-pressure type.